Search Results

This study provides an experimental account of the effect of panhard rod suspensions on heavy truck ride, as evaluated by the B-post vertical and fore-aft accelerations. After describing the test setup, the paper will describe the details of two rear cab suspensions that are commonly used in North American trucks. Cab suspensions with dampers or similar elements that are used to provide lateral forces at the rear of the cab (called “baseline” cab suspension for the purpose of this study) and those that use a lateral link with a torsion spring at one end-commonly called “panhard rod”-are the two classes of rear cab suspensions that are considered in this study. The tests are performed on a class 8 truck that is setup in the laboratory for the purpose of providing good test repeatability and conducting an accurate design of experiment. The test results, which are analyzed in frequency domain, are compared for the two cab suspensions.

This experimental study determines the effect of truck frame stiffness on truck ride, as measured by B-post vertical and fore-aft accelerations. After describing the test setup, the paper will describe the details of two truck frames that are used in a series of tests conducted on a class-8 truck in the laboratory. The frames that are used for the tests include what commonly is used in production trucks in North American markets (called “baseline” frame), and a frame that is 15% thinner (called “thin” frame). The test results, which are analyzed in frequency domain, are compared for the two frames. They indicate that the thin frame performs similar to the baseline frame when the truck is subjected to heave inputs. For roll inputs, the thin frame causes an increase in B-post accelerations, mostly at frequencies associated with the frame beaming and the primary (axle) suspension resonance.

Skyhook control has been used extensively for semiactive dampers for a variety of applications, most widely for passenger vehicle suspensions. This paper provides an experimental evaluation of how well skyhook control works for improving roll stability of a passenger vehicle. After discussing the formulation for various semiactive control methods that have been suggested in the past for vehicle suspensions, the paper includes the implementation of a semiactive system with magneto-rheological (MR) dampers on a sport utility vehicle. The vehicle is used for a series of road tests that includes lane change maneuvers, with different types of suspensions. The suspensions that are tested include the stock suspension, the uncontrolled MR dampers, skyhook control, and a new semiactive control method called “SIA skyhook.” The SIA Skyhook augments the conventional skyhook control with steering input, in order to account for the suspension requirements during a lateral maneuver.

The primary purpose of this paper is to evaluate how various time-domain system identification techniques, which have been successfully used for different dynamic systems, can be applied for identifying heavy truck dynamics. System identification is the process by which a model is constructed from prior knowledge of a system and a series of experimental data. The parameters obtained from the identification process can be used for developing or improving the mathematical representation of a physical system. In contrast to lighter vehicles, heavy trucks have considerably more flexible frames. The frame can exhibit beaming dynamics in a frequency range that is within the range of interest for evaluating the ride and handling aspects of the truck. Understanding the dynamic contributions of the truck frame is essential for improving the ride characteristics of a vehicle. This understanding is also needed for designing new frame configurations for the existing or new production trucks.

Two alternative methods are presented for studying the comfort, and possibly fatigue, effects of vehicle seats, in particular truck seats that include a seat suspension. The methods, named “aPcrms” and “SPD%” for the purpose of this study, are based on analyzing the pressure profile at the seat cushion/human body interface in a manner that accounts for the contact area, pressure distribution, and change in contact pressure. The alternative methods are compared with methods suggested in the past for vehicle seats, using a laboratory test rig and a truck seat with a conventional foam cushion and an air-inflated seat cushion. The results show that the proposed methods better highlight the human comfort differences between the two cushion types, and provide objective measures that better correlate with subjective measures from a separate field study on the same types of seats.

This paper studies the effect of different longitudinal load conditions, roundabout cross-sectional geometry, and different semi-truck pneumatic suspension systems on roll stability in roundabouts, which have become more and more popular in urban settings. Roundabouts are commonly designed in their size and form to accommodate articulated heavy vehicles (AHVs) by evaluating such affects as off-tracking. However, the effect of the roadway geometry in roundabouts on the roll dynamics of semi-tractors and trailers are equally important, along with their entry and exit configuration. , Because the effect of the roundabout on the dynamics of trucks is further removed from the immediate issues considered by roadway planner, at times they are not given as much consideration as other roadway design factors.

This study provides a numerical evaluation of the dynamic coupling that exists between the powertrain, suspensions, and tire dynamics in class 8 trucks. The spatial dynamics of the driveline, including the offset angels that commonly exist in practice, are modeled along with a lumped-parameter representation of the suspension and tire dynamics in vertical, longitudinal, and torsional directions. The model is used to show how the suspension dynamics and the angle change that it causes in driveline geometry can affect the vibrations resulting from the powertrain. The numerical model is also used for a parametric study in which the effect of various suspension and powertrain parameters on the dynamic coupling that exists between the two is evaluated.

This study pertains to motion control algorithms using statistical calculations based on relative displacement measurements, in particular where the rattle space is strictly limited by fixed end-stops and a load leveling system that allows for roll to go undetected by the sensors. One such application is the cab suspension of semi trucks that use widely-spaced springs and dampers and a load leveling system that is placed between the suspensions, near the center line of the cab. In such systems it is possible for the suspension on the two sides of the vehicle to settle at different ride heights due to uneven loading or the crown of the road. This paper will compare the use of two moving average signals (one positive and one negative) to the use of one root mean square (RMS) signal, all calculated based on the relative displacement measurement.

Inerters have become a hot topic in recent years, especially in vehicle, train, and building suspension systems. The performance of a passive inerter and a semi-active inerter was analyzed and compared with each other and it showed that the semi-active inerter has much better performance than the passive inerter, especially with the Hybrid control method. Eight different layouts of suspensions were analyzed with a quarter car model in this paper. The adaptation of dimensionless parameters was considered for a semi-active suspension and the semi-active inerters. The performance of the semi-active inerter suspensions with different layouts was compared with a semi-active suspension with a conventional parallel spring-damper arrangement. It shows a semi-active suspension, with more simple configuration and lower cost, has similar or better compromise between ride and handling than a semi-active inerter with the Hybrid control.

A comprehensive comparison between an air-inflated seat cushion designed for truck seats and a commonly used foam cushion is provided, using a single-axis test rig designed for seat dynamic testing. Different types of tests were conducted in order to evaluate various aspects of each type of cushion; in terms of their response to narrowband (single frequency) dynamics, broadband input of the type that is commonly used in the trucking industry for testing seats, and a step input for assessing the damping characteristics of each cushion. The tests were conducted over a twelve-hour period—in four-hour intervals—measuring the changes that occur at the seat cushion over time and assessing how these changes can affect the metrics that are used for evaluating the cushions. The tests indicated a greater stiffening of the foam cushion over time, as compared with the air-inflated cushion that showed almost no change in stiffness when exposed to a static weight for twelve hours.